Parts for Kenmore Models 6440A REV G

Water inlet valve with mounting bracket (valve)

The water fill valve kit attaches the water lines on the back of your washer. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. This kit includes a blue body fill valve, a mounting bracket and a screw. The valve body of this part could be blue or green in color. There are two ports for water to enter, and this valve is compatible with a half inch ID hose. It has two 3/4-11x1/2 NHT hose threads. This is a genuine OEM part. Please remember to disconnect the power and the water supply before starting your repair.

Easy Part #:: EAP334646

Availability:: In Stock

Price:: $32.45

Surface burner plug-in block kit (kit, top element term)

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw. This part is used to connect the wire harness to the surface burner element. If your element will not heat at all, or if it is not heating properly, it is likely an issue with the terminal block and it will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power supply before starting your repair.

Easy Part #:: EAP340571

Availability:: In Stock

Price:: $12.63

Freezer door key

This white plastic freezer door key is used for most upright or chest freezers. If your door key becomes broken or lost it will need to be replaced. This is a genuine OEM part. It is sold individually.

Easy Part #:: EAP1991481

Availability:: In Stock

Price:: $10.57

Multi rib belt (multi rib belt - 93-1/2")

This dryer drum belt from Whirlpool/Kenmore has five ridges. It is used for many of Whirlpool's brands of clothes dryers. This flat belt is 1/4 of an inch wide.

Easy Part #:: EAP382430

Availability:: In Stock

Price:: $20.66

Water valve with guard (water valve)

This double inlet water valve has quick connections. This valve has 1/4 and 5/16 John Guest fittings for the outlet lines and a 1/4 compression fitting for the inlet line.

Easy Part #:: EAP16226572

Availability:: In Stock

Price:: $76.66

Lint filter (screen)

This filter collects lint as it passes through the dryer vent.

Easy Part #:: EAP1491676

Availability:: In Stock

Price:: $57.83

Refrigerator pantry drawer door cover (pantry lid assy)

The pantry drawer lid helps keep everything inside the drawer, it acts as a cover and keeps your drawer at the proper temperature by creating a seal. If the door will not open or close, or if the drawer section is too cold, you may need to replace the lid. The pantry drawer lid is a genuine OEM part.

Easy Part #:: EAP11723190

Availability:: In Stock

Price:: $97.09

Center rail (rail, center crisper)

This is the center support rail for the refrigerator crisper drawer. This rail supports center of the crisper frame.

Easy Part #:: EAP11752912

Availability:: In Stock

Price:: $23.44

Burner grate pads - kit of 5 (pad-grate)

These pads go on the bottom of your gas cooktop grates to prevent them from moving and scratching the top of your appliance.

Easy Part #:: EAP389174

Availability:: In Stock

Price:: $9.04

Lower bake element (use wpl 74004107)

The bake element is located on the bottom of the oven cavity to supply heat for baking. The element terminals are male quarter inch spade connectors and have push on wire terminals. This element measures 19 inches wide by 20 inches long, including the terminals. If your oven is not heating evenly, the element will not heat, or there is little to no heat when baking, you may need to replace the element. This is a genuine OEM bake element. Please remember to disconnect the power to your oven before you start your repair.

Easy Part #:: EAP11744518

Availability:: In Stock

Price:: $48.51

Igniter kit (use wpl 279311)

This silicon carbide igniter with ceramic holder kit includes the 3-inch flat igniter, mounting bracket, 4-inch wire leads, and the plug. It can replace both round and flat igniters. This kit is used for many gas clothes dryers. This part ignites the gas within the dryer to heat the dryer during the cycle, so if your dryer takes too long to dry, has no heat or not enough heat, you may need to replace the igniter. Be sure to disconnect the power source from your dryer before you do this repair. The igniter is very fragile and should be handled with care.

Easy Part #:: EAP334180

Availability:: In Stock

Price:: $36.81

Lower rack (rack lower roller asm)

The lower rack provides easy loading with flexibility for small and large items, and helps hold the dishes in place during the wash and dry cycle. The rack measures approximately 20.48 X 21.99 and the wheels are included with the rack. This is a genuine OEM part and is white in color.

Easy Part #:: EAP17137102

Availability:: In Stock

Price:: $181.05

Bake element - push on terminals - 240v (bake element)

The bake element is located on the bottom of the oven with male spade terminals and push-on terminals. The bake element provides heat for baking. If your oven is too hot, not heating evenly, element is not heating, or little to no heat when baking, you may need to replace your bake element. This is a genuine OEM part. Please remember to disconnect the power to the range before starting your repair.

Easy Part #:: EAP249238

Availability:: On Order

Price:: $82.03

Infinite burner switch (switch)

This surface burner switch controls the stove top 8-inch surface burner temperature. This switch is 240-volt, 2100-2600 watt, and 8.8-10.8 amp. If your element is not defective but will not heat, you may need to replace the switch. This burner switch is a genuine OEM part. It is recommended to disconnect the power to your range before you start your repair.

Easy Part #:: EAP1145040

Availability:: In Stock

Price:: $39.97

Crisper glass shelf insert (insert-pan cover)

Glass only. This glass insert measures 23.82 x 15.50-in. This is an authentic Frigidaire replacement part. The crisper shelf insert is designed by the manufacturer for use in refrigerators. This part is made of glass, and is placed over the crisper pan drawers. No tools are required when replacing this item. Simply remove the old part and slot the new one into place. This item is sold individually.